Mechanical Engineering (MECH)

MECH-111 Computer Programming for MEs 4 Credits

Prerequisites: None
The fundamentals of computer programming are the focus of this course, with its emphasis on digital computing, basic programming skills, and algorithm writing. MATLAB is used as the computer programming language, although programming skills are developed that transcend languages. Students are taught primarily about algorithmic thinking and engineering problem solving, rather than computer programming syntax. Algorithm writing is introduced using examples that are drawn from mechanical engineering.
Lecture: 4, Lab 0, Other 0

MECH-210 Statics 4 Credits

Corequisites: MATH-102, PHYS-114, PHYS-115
Prerequisites: MATH-101 or MATH-101X
This course deals with a discussion and application of the following fundamental concepts: (1) static force analysis of particles, rigid bodies, plane trusses, frames, and machines; (2) first and second moments of area; (3) friction; (4) internal forces; and (5) stress deflection analysis of axially loaded members. Topics covered will be (1) the static force and moment equilibrium of two and three dimensional systems; (2) resultant forces and moments due to the application of concentrated and/or distributed loads; (3) couples; (4) the center of mass and the area moment of inertia of a rigid body; (5) shear force and bending moment diagrams of a rigid body; and (6) the stress and deflection analyses of axially loaded members. Free body diagrams will be formulated in a computer-aided environment in order to enhance the students’ critical thinking and problem solving capabilities. Several open-ended homework and mini projects will be assigned in order to incorporate a design experience in the course.
Lecture: 4, Lab 0, Other 0

MECH-211 Circuits and Mechatronics 4 Credits

Prerequisites: (MECH-111 or CS-100 or CS-101 or ECE-101) and PHYS-224 and PHYS-225
This course discusses mechatronics concepts within a mechanical engineering context. This includes DC circuit design, microcontroller programming, digital and analog input and output, signal conditioning, and how these concepts can be used to control mechanical systems.
Lecture: 4, Lab 0, Other 0

MECH-212 Mechanics of Materials 4 Credits

Prerequisites: MECH-210
The fundamental topics of this course include: normal and shear stress and strain, Hooke’s law, Poisson’s ratio, generalized Hooke’s law, axial translation, torsion of circular bars, angle of twist, bending of beams, flexure formula, flexural shear stress, beam deflections, combined stresses, transformation of stresses, Mohr’s circle, statically indeterminate problems, columns. The use of basic computational tools will be introduced at the end of several lecture modules including: axial loading, torsional loading, and flexural loading. Homework and design projects will be assigned.
Lecture: 4, Lab 0, Other 0

MECH-231L Signals for Mechanical Systems Lab 1 Credits

Prerequisites: PHYS-224 and PHYS-225
This lab complements the electrical engineering course, EE-212, and provides the necessary knowledge and skills of electrical engineering to non-electrical engineering majors. It teaches students how to use sensors and instruments to make meaningful measurements in mechanical and electrical engineering systems. This lab course introduces students to: (1) the laws and methods of circuit analysis (2) sensors used in measurements of displacement, temperature, strain and fuel cell systems and (3) the amplifiers and other instrumentation used to process the signals from these sensors.
Lecture: 0, Lab 2, Other 0

MECH-300 Computer Aided Engineering 4 Credits

Prerequisites: IME-100 and MECH-212
This course is focused on computer aided engineering (CAE). Basic and advanced techniques are included, involving creation of two-dimensional (2D) and three-dimensional (3D) technical drawings, assembly generation and parametric modeling methods. An introduction to computer simulation, using Finite Element Analysis (FEA), is incorporated. It is utilized for analysis of common structural components.
Lecture: 4, Lab 0, Other 0

MECH-307 Materials Engineering 4 Credits

Prerequisites: (CHEM-135 or CHEM-137) and CHEM-136
This course will develop the skills of identifying appropriate materials for a given design by considering mechanical properties which are based on experimental data. The manner in which processing can be used to engineer a material for specific applications will be explored. The mechanical performance of materials will be assessed by comparing a range of properties; strength, modulus, Poisson's ration, coefficient of thermal expansion, ductility, toughness, corrosivity, and others. Students will learn which properties can and cannot be engineered to meet a specific need via alloying and/or heat treating.
Lecture: 4, Lab 0, Other 0

MECH-310 Dynamics 4 Credits

Prerequisites: MECH-210 and PHYS-114 and PHYS-115 and (MATH-102 or MATH-102X or MATH-102H)
This course deals with a discussion and application of the following fundamental concepts: (1) application and basics of Newtonian mechanics and physical laws; (2) a study of the kinematics and kinetics of a particle including relative and absolute motion, friction concepts; (3) additional analysis of particle dynamics using work-energy and impulse-momentum methods, analysis of impact events; (4) analysis of a system of particle using work-energy, impulse, linear and angular momentum; (5) kinematics and kinetics of a rigid bodies analyzed in various reference systems; (6) additional analysis of rigid body dynamics using work-energy and impulse-momentum; (7) inertia quantities. Computational techniques will be incorporated into several design projects throughout the semester to illustrate alternative solution methods.
Lecture: 4, Lab 0, Other 0

MECH-311 Mechatronics Systems Design 4 Credits

Prerequisites: MECH-211 and PHYS-224 and PHYS-225
This course explores mechatronics as a design philosophy. Students will learn to integrate electrical and software elements into mechanical designs to create systems that are able to respond to their environment and execute tasks without human interaction. Concepts will be applied with individual and team projects, designing, building, and testing mechatronic systems.
Lecture: 2, Lab 4, Other 0

MECH-312 Mechanical Component Design I 4 Credits

Prerequisites: MECH-212
This course involves application of theory and techniques learned in the mechanics courses to the concepts of mechanical component design. Through lectures and class example and homework problems the student will be introduced to design methodology. This methodology requires learning to develop and set-up a mechanical component design problem, through properly understanding and solving the problem based upon the given data, design constraints, making and verifying assumptions. Selection of the proper analytical tools as required, producibility and maintainability of the design, materials selection, safety, and cost considerations. Take-home project problems will enhance and demonstrate the type of study and research required for design. Topics to be studied include strength and fatigue considerations, shaft design, threaded fasteners, lubrication and bearings, springs, and fundamentals of gear analysis, including forces, stresses and terminology.
Lecture: 4, Lab 0, Other 0

MECH-320 Thermodynamics 4 Credits

Prerequisites: PHYS-224 and PHYS-225
A study of the first and second laws of thermodynamics and their application to energy conversions for closed systems and engineering devices undergoing various processes. Property relations for pure substances, ideal gases, and atmospheric air are analyzed. Gas cycles including spark-ignition and compression-ignition engines, and turbine cycles in addition to steam power cycles and refrigeration cycles are evaluated to determine performance parameters and energy efficiencies. This course includes laboratory experiments to validate the theory and a term project related to a contemporary environmental topic.
Lecture: 3, Lab 2, Other 0

MECH-322 Fluid Mechanics 4 Credits

Prerequisites: MECH-320
This is a first course in Fluid Mechanics that involves the study of fluid flow in ducts and over objects. The course introduces the fundamental aspects of fluid motion, fluid properties, flow regimes, pressure variations, fluid kinematics, and methods of flow description and analysis. Presents the conservation laws in their differential and integral forms, and their use in analyzing and solving fluid flow problems. In addition, the concept of using similitude and dimensional analysis for organizing test data and for planning experiments is introduced. The effects of fluid friction on pressure and velocity distributions are also discussed. The effects of compressibility (various density) on fluid flows are also included.
Lecture: 3, Lab 2, Other 0

MECH-330 Dynamic Systems with Vibrations 3 Credits

Corequisites: MECH-331
Prerequisites: (MATH-204 or MATH-204H) and MECH-310
This is the first course in System Dynamics. The objective of this course is to provide an understanding into basic principles and methods underlying the time domain, dynamic characterization of physical systems and components. The focus is on a multi-discipline approach. Derivation of mathematical models of systems using energy and state space models is emphasized. Application of modeling techniques to understand the behavior of free vibration (damped and undamped), forced vibration for harmonic excitation, and systems involving multi-degrees of freedom, including the use of frequency response and Bode plots, will be discussed. MECH-331 must be taken concurrently (or previously passed) with this course.
Lecture: 3, Lab 0, Other 0

MECH-331 Dynamic Sys w Vibrations Lab 1 Credits

Corequisites: MECH-330
Prerequisites: (MATH-204 or MATH-204H) and MECH-310
This is the lab component accompanying the first course in System Dynamics. The objective of this course is to provide an understanding of basic principles of modeling and simulation of dynamic systems. The application of material covered in MECH-330 is stressed, with both computational and equipmentbased lab experiences designed to reinforce the lecture content. MECH-330 must be taken concurrently (or previously passed) with this course.
Lecture: 0, Lab 1, Other 0

MECH-350 Introduction to Bioengineering Applications 4 Credits

Prerequisites: MECH-210
This course deals with a discussion and application of the following fundamental concepts: (1) basic anatomy and physiology of the overall human body; (2) basic anatomy and physiology of specific structures including brain, ear, eyes, heart, kidney, gastro-intestinal system, articular joints, and bones; (3) an appreciation of the engineering basis for current and developmental products designed to diagnose and replace these biological structures; (4) exposure to biochemistry, biomaterials, and biomechanics at a fundamental level; and (5) an understanding of current laws which govern bioengineering device manufacturing. A semester project will require the student to rigorously research an existing product or emerging technology of relevance to bioengineering and the human body.
Lecture: 4, Lab 0, Other 0

MECH-397 MECH Free Elective 4 Credits

Prerequisites: None
This is a Mechanical Engineering course used to record credit for transfer or guest courses ONLY that are not equivalent to existing Kettering University Mechanical Engineering courses.
Lecture: 4, Lab 0, Other 0

MECH-412 Mechanical Component Design II 4 Credits

Prerequisites: MECH-307 and MECH-312
This course is an extension of MECH-312, Mechanical Component Design I. Topics to be studied will include wear and contact stress analysis, helical and bevel gear systems, impact analysis, temperature effects in design, introduction to fracture mechanics, code based design, welded connections, and topics selected by the students. Course work will consist of lectures plus, the students will perform research on these topics and provide written and oral reports, including examples.
Lecture: 4, Lab 0, Other 0

MECH-415 Engineering Optimization 4 Credits

Prerequisites: MATH-204 and (MATH-305 or MATH-307)
Minimum Class Standing: Senior
Introduction to the general model of numerical optimization and its application to engineering design. The formulation and classification of the optimization problems will be discussed. The computational search techniques for solving the different classes of optimization problems will be studied. These techniques include single and multivariable, zero and first order constrained and unconstrained, linear and nonlinear search algorithms. The developed algorithms will be used to find the optimum solutions for a variety of engineering design problems.
Lecture: 4, Lab 0, Other 0

MECH-416 Introduction to Finite Element Analysis with Structural Applications 4 Credits

Prerequisites: None
The main objective of this course is to introduce the theory of Finite Element Method with applications to simple and real-world structural components. Both 1-D and 2-D formulations will be presented and discussed. Commercial F.E.A. codes such as NX, ANSYS and/or other software will be integrated to enhance the understanding of the theory presented. Other engineering and math software application programs such as MATLAB/Maple will also be used. Several practical design projects will be assigned during the term of this course.
Lecture: 4, Lab 0, Other 0

MECH-420 Heat Transfer 4 Credits

Prerequisites: MECH-320 and MECH-322
This course addresses the principles of heat transfer by conduction, convection, radiation and energy conservation, fins, steady-state and transient problems, and analysis and selection of heat exchangers.
Lecture: 3, Lab 2, Other 0

MECH-421 Energy and Environmental System Design 4 Credits

Corequisites: MECH-422
Prerequisites: MECH-300 and MECH-307 and MECH-312 and MECH-420
Minimum Class Standing: Senior
The objective of this course is to provide a comprehensive capstone design experience in the engineering and design of energy systems. Students will work in design teams to complete the design of an energy efficient and environmentally friendly system for use in a residential or commercial building, a power plant, or any other system that requires energy. The course covers one or more of the following energy sources or energy conversion devices: fossil, solar, wind, tidal, hydro, wave, biomass, geothermal, alternative fuels, or fuel cells.
Lecture: 4, Lab 0, Other 0

MECH-422 Energy Systems Laboratory 4 Credits

Corequisites: MECH-420
Prerequisites: MECH-320 and MECH-322
A laboratory course dealing with the detailed application of the first and second laws of thermodynamics; continuity, momentum, and energy equations; and principles of conduction, and convection to a variety of energy systems. Topics such as internal and external flows, refrigeration, psychrometrics, aerodynamic lift and drag, pump and fan performance, compressible flow and shock waves, free and forced convection, and heat exchangers are covered. Computational fluid dynamics (CFD), automatic data acquisition, flow visualization, and a design experience are incorporated into various laboratory experiments.
Lecture: 2, Lab 4, Other 0

MECH-426 Fuel Cell Science and Engineering 4 Credits

Prerequisites: CHEM-135 and CHEM-136 and MECH-322
The objectives of this course are to introduce the students to and provide an extensive experience in the engineering and design of fuel cell devices. The course lecture will cover the five main types of fuel cells and their operational parameters and applications, efficiency and open circuit voltages. Other topics include: fuel cell systems, compressors, turbines, fans, blowers, pumps, DC voltage regulation and voltage conversion, fuels for fuel cells and methods of processing. Codes and standards of operating a fuel cell powered device will be presented as well as laws regulating the transportation of hazardous materials contained within these devices. Students will also study the design requirements for the introduction of fuel cells into various devices such as: golf-cart, bicycles, laptops, toys, road signs, etc. The lecture is supported with laboratory experiences.
Lecture: 4, Lab 0, Other 0

MECH-427 Energy and the Environment 4 Credits

Prerequisites: None
This course covers energy conversion and conservation, fossil fuels, renewable and bio-fuels, solar, geothermal and nuclear energy, alternative energy (wind, water, biomass), hydrogen as an energy carrier, historical context of the technology, the role of energy in society (economic, ethical, and environmental considerations), energy forecasts and the trend toward a hydrogen economy. Public policy, global warming and Co2 footprints and offsetting are also discussed.
Lecture: 4, Lab 0, Other 0

MECH-428 Bio and Renewable Energy 4 Credits

Prerequisites: PHYS-114 and PHYS-115
This course provides an opportunity for the students to study bio and renewable energy and their applications around the globe. The students also perform hands-on experiments in several areas of sustainable energy. The fundamental principles required will be provided prior to laboratory experimentation. Topics covered include bur are not limited to solar thermal energy and photovoltaics, wind energy, energy storage, bioenergy used for power, transportation and heating, PEM fuel cells, and alternative energy vehicles.
Lecture: 3, Lab 1, Other 0

MECH-430 Dynamic Systems with Controls 3 Credits

Corequisites: MECH-431
Prerequisites: MECH-330 and MECH-331 and MATH-305
The objective of this course is to build upon previous knowledge of multidiscipline system modeling to understand basic principles and design methods underlying steady-state and dynamic analysis of control systems. System performance is analyzed in both time and frequency domains using computer simulation. Classical control system design with both feedforward and feedback configurations are emphasized. Key topics include PID control, root locus plots, and Nyquist plots. MECH-431 must be taken concurrently (or previously passed) with this course.
Lecture: 3, Lab 0, Other 0

MECH-431 Dynamic Systems with Controls Lab 1 Credits

Corequisites: MECH-430
Prerequisites: MECH-330 and MECH-331 and MATH-305
This is the lab component accompanying the second course in System Dynamics. The objective of this course is to provide an understanding of basic principles of designing, implementing, and evaluating controls for dynamic systems. The application of material covered in MECH-430 is stressed, with both computational and equipment-based lab experiences designed to reinforce the lecture content. MECH-430 must be taken concurrently (or previously passed) with this course.
Lecture: 0, Lab 1, Other 0

MECH-440 Introduction to Internal Combustion Engines 4 Credits

Prerequisites: MECH-320
This course introduces the basic fundamentals of internal combustion engines and their operation. Topics covered include thermodynamic analysis of 4-stroke and 2-stroke cycles, spark ignition and compression ignition engines, intake systems, exhaust systems, fuel injection and moisture preparation, combustion, emissions, slider crank mechanism, vibrations, engine testing, and engine design. Recent technologies such as variable valve timing and lift, variable compression ratio, gasoline direct injection, homogeneous-charge compression ignition, turbocharging and supercharging of engines are also presented.
Lecture: 4, Lab 0, Other 0

MECH-441 Advanced Automotive Power Systems 4 Credits

Prerequisites: MECH-320
This course serves to expand student’s knowledge of automotive power systems. Topics covered include, detailed thermodynamic cycle analysis of various power cycles, emerging alternative fuels and power systems for automotive use (current topics include high-blend alcohol/gasoline fuels, gasoline direct injections (GDI) engines, hybrid electronic Powertrains, and fuel-cells). Students are also expected to work on design projects which are determined by the instructor. Students are expected to work on projects leading to the development of presentations and/or technical papers for professional society meetings (i.e. SAE, Global Powertrain Congress, etc.).
Lecture: 4, Lab 0, Other 0

MECH-442 Chassis Systems 4 Credits

Prerequisites: MECH-330
The objective of this course is to provide a comprehensive experience in the area of automotive chassis engineering. The course covers tires, suspensions and steering. A vehicle system approach is used for learning. Vehicle dynamics concepts and improvement approaches are integrated into the course content. Professional computer-aided engineering tools are introduced (e.g. CarSim, SuspensionSim) and applied to the areas of suspension analysis and overall vehicle dynamics performance. Students work in teams to complete a chassis design project applicable to passenger cars or light trucks.
Lecture: 4, Lab 0, Other 0

MECH-444 Introduction to Automotive Powertrains 4 Credits

Corequisites: MECH-311
Prerequisites: MECH-212
An introduction to the performance of motor vehicle and the design of automotive power transmission systems. Topics covered include, loads on the vehicle, evaluation of various engine and vehicle drive ratios on acceleration performance and fuel economy, manual transmission design, and automatic transmission design.
Lecture: 4, Lab 0, Other 0

MECH-445 Hybrid Electric Vehicle Propulsion 4 Credits

Corequisites: MECH-430, MECH-431
Prerequisites: None
An introduction to the principles of hybrid electrical vehicle propulsion systems for Mechanical and Electrical Engineering students. A major emphasis of the course will be to broaden the mechanical engineering student’s knowledge of electrical engineering so that he/she can understand the fundamentals of electrical motors, electrical motor controls, and electrical energy storage systems. The course is also intended to strengthen the knowledge of electrical engineering students relative to automotive powertrain design. With this background, the integration of these hybrid electric components into the hybrid electric vehicle powertrain system will be studied, including electric energy storage (batteries, flywheels, ultra-capacitors) and electrical energy production-fuel cells. Relevant codes and standards will be emphasized.
Lecture: 4, Lab 0, Other 0

MECH-446 Vehicle Systems Dynamics 4 Credits

Prerequisites: MECH-330
This course begins with an introduction to vehicle weight distribution and tire patch forces. Acceleration, braking, ride and handling concepts follow. Mathematical models for ride and handling are derived and presented. Chassis design factors (CDF) effects on ride and handling are emphasized. Computer simulation software (e.g. CarSim) is used as an integral part of the course and for projects assigned during the term. Overview of technology and latest developments in the field of vehicle dynamics (e.g. SAE publications) are part of the course.
Lecture: 4, Lab 0, Other 0

MECH-448 Vehicle Design Project 4 Credits

Prerequisites: MECH-493
Minimum Class Standing: Senior
This is the second course of the ME capstone design project. It provides a comprehensive engineering design experience in automotive engineering, structural systems, dynamic systems, or energy systems. Students will work in small teams on design and development projects in a classroom environment that is representative of a competitive workplace. Systems engineering disciplines and problem-solving techniques will be applied. The final design will be validated using a prototype with appropriate test methods and / or simulations to evaluate its performance, quality, cost, and environmental compliance. Design reviews in the form of class presentations and written reports are required throughout this course.
Lecture: 4, Lab 0, Other 0

MECH-450 Automotive Bioengineering: Occupant Protection and Safety 4 Credits

Prerequisites: MECH-310
A discussion and application of the following fundamental concepts: (1) an overview of Federal Motor Vehicle Safety Standards; (2) basic anatomy and physiology of the overall human body; (3) introduction to injury biomechanics including rate, load, and acceleration dependent injury mechanisms; (4) overview of injury prevention strategies including a variety of air bags, multipoint restraint systems, and occupant sensing methodologies; (5) the basic structure and function of anthropomorphic test devices; (6) introduction to experimental crash simulation; (7) virtual occupant simulation using MADYMO or similar computational tools.
Lecture: 4, Lab 0, Other 0

MECH-451 Vehicular Crash Dynamics and Accident Reconstruction 4 Credits

Prerequisites: MECH-310
A discussion and application of the following fundamental concepts: (1) 2D and 3D dynamics of vehicular crash, (2) application of linear and angular momentum principles to vehicular impact, (3) application of energy principle to vehicular impact, (4) estimation of crash energy from vehicular crush profile, (5) vehicular crash pulse analysis, (6) occupant kinematics, (7) dynamics of rollover and pole collision, (8) crash data recorder (CDR) analysis, (9) and special topics in accident investigation forensics.
Lecture: 4, Lab 0, Other 0

MECH-482 Mechanics and Design Simulation of Fiber-Reinforced Composite Materials 4 Credits

Prerequisites: MECH-300
The properties, mechanics, and design simulation aspects of fiber-reinforced composite materials are covered in this course. Topics include: constituents and interfacial bonding, microstructure and micromechanics, theory of anisotropy, classical laminate theory, material characterization, failure and damage, manufacturing techniques, composite structure design, and introduction of nanocomposite.
Lecture: 4, Lab 0, Other 0

MECH-490 Fluid Power Systems 4 Credits

Corequisites: MECH-312
Prerequisites: MECH-300
This course begins with basic hydraulics circuits followed by the sizing and control of hydraulic cylinders and motors. Prime movers are introduced and matched to system requirements. Valves are described while circuit tracing and component recognition are emphasized. The course also addresses air consumption, pneumatic component sizing and ladder logic. There will be limited consideration of hydraulic servo and two design projects.
Lecture: 4, Lab 2, Other 0

MECH-493 Senior Design 1 4 Credits

Prerequisites: MECH-300 and MECH-310 and MECH-312 and MECH-322
This is the first of two required courses for the ME capstone design project. The course prepares students to engage in design and decision-making using engineering knowledge while encouraging ingenuity. Students will work in small teams on a design project of their own choosing, or as assigned by the instructor. The primary objective is to develop a design proposal, including engineering specifications and a project plan. This is followed by initial design work with the goal of building, testing, and analyzing the design in the second capstone course.
Lecture: 4, Lab 0, Other 0

MECH-495 Senior Design Project 4 Credits

MECH-498 Mechanical Eng Study Abroad 4 Credits

Prerequisites: None
Advanced Topics in Mechanical Engineering. This is a transfer course taken a part of Kettering's Study Abroad Program.
Lecture: 4, Lab 0, Other 0

MECH-510 Analysis and Design of Machines and Mechanical Assemblies 4 Credits

Corequisites: MECH-330
Prerequisites: MECH-300 and MECH-310 and MECH-312
The main aim of this course is to integrate the concepts of kinematic & dynamic analyses to the design of machines and mechanical assemblies used in automotive, medical equipment and other applications. These include (but are not limited to) the analysis and design of reciprocating engine sub-systems such as, piston cylinder mechanism, steering linkages, window and door-lock mechanisms, over-head valve linkage system, flywheel, gears & gearboxes, universal couplings and automotive differential. Synthesis of mechanism systems used in medical equipment area will also be covered. Kinematic and dynamic characteristics such as displacement, velocity, acceleration and forces are analyzed by graphical and analytical methods. CAE tools will be used to perform kinematic, dynamic and stress analyses and fatigue design of these systems using CAE tools. Temperature effects will also be included wherever appropriate in the design. Several practical design projects will be assigned during the term of this course.
Lecture: 4, Lab 0, Other 0

MECH-515 Failure and Material Considerations in Design 4 Credits

Corequisites: MECH-412
Prerequisites: None
Designing components that are safe and reliable requires efficient use of materials and assurance that failure will not occur. Even still, components do fail. In this course, students will be introduced to the techniques of designing for life and material considerations involved in that process. In addition, students will also study how to analyze those components which do fail, and evaluate safe-life and remaining life in a design through the study of real-life component design and current failures.
Lecture: 4, Lab 0, Other 0

MECH-523 Applied Computational Fluid Dynamics 4 Credits

Prerequisites: MECH-322 and (MATH-313 or MATH-418 or MATH-423)
This course includes solution methods to the Navier-Stokes equations in a discrete domain. Grid generation, coordinate transformation, discretization, explicit, implicit, semi-implicit, a variety of algorithms, post-processing, and interpretations of results are discussed. Solution techniques for compressible and incompressible flows, their applicability, robustness, and limitations are covered. External and internal flows with and without chemical reactions are also discussed. The learning process involves hands-on experience on grid generation, setting up a CFD code, post-processing, and a thorough discussion on the results. The students will work on a final project that is a practical problem of significant magnitude and importance to industry. This work must be publishable in the student’s journal or presentable in a conference.
Lecture: 4, Lab 0, Other 0

MECH-525 Introduction to Multiphysics Modeling and Simulation in Fluid Mechanics and Heat Transfer 4 Credits

Prerequisites: MECH-322 and MECH-420
This course solves a variety of engineering problems with the aid of computational software mainly in the field of fluid mechanics and heat transfer. Pipe flow, incompressible flow, laminar and turbulent flow, drag, and lift are subjects covered during the first part of the course. In the second part, topics in heat transfer are used uch as conduction in solids, fin design, convection, heat exchangers, and radiation. In a third part, selected topics in electrical conductive media and reaction engineering are also covered. This course compliments MECH-322 and MECH-420 and could be considered an extension of the two courses where problems are solved in 2D and 3D using computational software. Different types of meshes will be discussed, post-processing of data will be analyzed through graphical techniques, and graphical results will be compared to well-known analytical solutions. Students will also complete a final project where both fluid mechanics and heat transfer physics will be used to solve practical engineering problems.
Lecture: 4, Lab 0, Other 0

MECH-562 Compressible Flow/Gas Dynamics 4 Credits

Prerequisites: MECH-322
The derivation and physical interpretation of the Navier-Stokes equations for compressible flows. Analysis of one-dimensional flows with discussions on normal, oblique, and bow shocks. Sound waves and unsteady wave motion are also covered. The method of characteristic (MOC) is taught and standard JANNAF CFD codes is utilized to understand the compressible flows and shock formation and behavior. The study is then further carried out to nozzle flows and jet/shock layer interaction. The students are required to not only understand the conventional methods used to obtain solution for compressible flow problems, but also to be able to utilize CFD and experimental methods to obtain solution for complex problems.
Lecture: 3, Lab 2, Other 0

MECH-564 Aerodynamics and Wing Theory 4 Credits

Prerequisites: MECH-322 and (MATH-305 or MECH-600)
Discussions on fundamentals of inviscid and viscous incompressible flows. Important topics in fluid mechanics such as potential flow, vortices, point sources, and coupling of inviscid and boundary layer flows are covered. Two and three dimensional wings (or airfoils) and some exact solutions to such flow problems are discussed. Semi-analytical methods for disturbance distribution on wings are introduced by perturbation method. The computational Panel method for two and three dimensional aerodynamics problems is discussed. Commercial computer programs are used to solve realistic problems in a three dimensional space.
Lecture: 4, Lab 0, Other 0

MECH-595 Automotive Seminar I 4 Credits

Prerequisites: None
Kettering has a partnership with the Society of Automotive Engineers (SAE) to offer both a certificate in Automotive Systems, as well as, a graduate degree in either Automotive Systems or the Mechanical Cognate. This seminar course would be comprised of a total of four Continuing Education Units (CEU) from SAE seminars, which have been reviewed and approved by a faculty review committee, consistent with Graduate academic policy. The transfer of credit must be supported by documentation from SAE for each individual applicant seeking such transfer.
Lecture: 4, Lab 0, Other 0

MECH-596 Automotive Seminar II 4 Credits